MVWS vs HVWS: Medium and High Velocity Water Spray Systems

MVWS vs HVWS is one of the most common points of confusion in industrial fire protection. Both are fixed water spray systems, and both are generally arranged as deluge installations, but they are designed for different jobs. A medium velocity water spray (MVWS) system mainly cools equipment and protects it from the heat of a nearby fire. A high velocity water spray (HVWS) system is designed to control and extinguish fires in specific hazards, such as oil-filled transformers.

Key Takeaways

  • MVWS is mainly for cooling and exposure protection. HVWS is mainly for fire control and extinguishment in suitable hazards.
  • They are not interchangeable. The protection objective must be stated for each application.
  • Both are generally arranged as deluge systems, but deluge describes the operating arrangement, not the nozzle type.
  • HVWS is not a universal answer to flammable-liquid fires, because water on low-flash-point liquids can splash or spread the fire.

MVWS vs HVWS at a Glance

MVWSHVWS
Main objectiveCooling and protection against heat radiationFire control and extinguishment
Typical applicationLPG vessels, process equipment, structural steelOil-filled transformers, specific engineered equipment
PrincipleWater absorbs heat from the exposed surfaceCooling, steam generation, emulsification and control of burning
DischargeOpen spray nozzles over the surfaceProjectors with higher velocity and larger droplets
Typical arrangementDelugeDeluge
Key limitNot exclusively exposure protection, so state the objectiveNot suitable for every flammable liquid
MVWS vs HVWS comparison: MVWS water spray cooling an LPG vessel and HVWS projectors protecting an oil-filled transformer, with objective, typical use, how it works and key limit

Medium Velocity Water Spray (MVWS)

Basic philosophy. MVWS is mainly used in industrial installations to cool exposed equipment and protect it from heat radiation from an adjacent fire. Its goal is to stop equipment temperature reaching a level that could cause structural damage, loss of mechanical integrity, excessive pressure rise or escalation of the incident.

For example, when a fire occurs near an LPG storage vessel, the vessel may be exposed to intense radiant heat. Without adequate cooling, its metal temperature can rise and its strength can fall, which increases the chance of a catastrophic failure. MVWS applies water over the exposed surface to absorb heat and keep the temperature within acceptable limits.

How it works. Specially selected open spray nozzles distribute water over the designated equipment or surface. The water absorbs heat mainly through sensible heating and evaporation, which reduces the heat transferred to the equipment. The system is generally arranged as a deluge installation, where the designated nozzles discharge together when detection or manual actuation operates it.

Typical applications:

  • LPG storage vessels and bullets
  • Process vessels and equipment
  • Flammable liquid storage installations
  • Cable galleries and trenches, where specifically designed
  • Structural steel and exposed equipment
  • Selected process areas that need exposure protection

Design considerations: required water application density, complete wetting of the protected surface, nozzle orientation and spacing, shadow areas behind structural members, water pressure and flow, fire exposure duration, wind and environmental conditions, and the reliability of the firewater supply.

MVWS should not be treated as exclusively an exposure-protection system. Depending on the hazard and design, water spray can also provide fire control or extinguishment.

High Velocity Water Spray (HVWS)

Basic philosophy. HVWS is designed for fire control and extinguishment of specific hazards where a high-velocity spray is suitable. A common industrial application is the protection of oil-filled electrical transformers. Transformer oil is combustible, and an internal fault or other initiating event may ignite it and produce an intense fire.

How it works. The control and extinguishing effect of water spray may come from:

  1. Cooling of burning surfaces
  2. Heat absorption and evaporation
  3. Steam generation and some oxygen displacement near the fire
  4. Emulsification of certain combustible liquids
  5. Controlled burning through continuous cooling where complete extinguishment is not practical

HVWS projectors produce a relatively high-velocity discharge with larger droplets than typical fine fog applications. This helps the water penetrate certain flame and air currents and reach the burning surface.

Typical applications:

  • Oil-filled power transformers
  • Certain combustible-liquid process equipment
  • Specific industrial machinery for which HVWS has been engineered

Design considerations: nature and flash point of the combustible liquid, expected burning conditions, nozzle velocity and spray characteristics, equipment geometry and obstructions, application density, hydraulic calculations, electrical safety and isolation, and containment and drainage of contaminated firewater.

HVWS is not a universal solution for all flammable-liquid fires. Water on low-flash-point hydrocarbon liquids can cause splashing, spreading or other adverse effects. Suitability must be shown through hazard-specific engineering.

Where Deluge Fits

Deluge is often confused with MVWS and HVWS. Deluge describes the arrangement: open nozzles that discharge together when a deluge valve operates. It is not a separate nozzle velocity class. A deluge system can use MVWS nozzles or HVWS projectors, depending on the protection objective. See our article on Sprinkler vs Deluge System for the full comparison.

How to Choose Between MVWS and HVWS

Ask these questions first:

  1. Is the objective cooling, fire control or extinguishment?
  2. What is the combustible material, and what is its flash point?
  3. Is the equipment electrical, and does it need isolation before discharge?
  4. What application density and duration does the design standard or hazard study require?
  5. How will contaminated firewater be collected?

A recommendation that says only “provide water spray” has not answered these questions.

Standards

The applicable Indian code of practice is IS 15325:2020, covering fixed automatic high and medium velocity water spray systems (First Revision). NFPA 15 covers water spray fixed systems. Check current editions on the BIS portal and on the NFPA site.

Our View

The most useful habit is to write the objective into the recommendation. “MVWS for LPG vessel exposure protection” and “HVWS for transformer fire control” are engineering statements. “Provide water spray” is not.

Frequently Asked Questions

What is the difference between MVWS and HVWS?
MVWS mainly cools equipment and protects it from radiant heat. HVWS mainly controls and extinguishes fires in suitable hazards such as oil-filled transformers.

Are MVWS and HVWS deluge systems?
Both are generally arranged as deluge systems. Deluge describes the operating arrangement, not the nozzle type.

Can HVWS be used on any flammable liquid fire?
No. Water on low-flash-point hydrocarbon liquids can splash or spread the fire. Suitability must be engineered for the hazard.

Can MVWS extinguish a fire?
Depending on the hazard and design, water spray can provide control or extinguishment, but MVWS is mainly used for cooling. State the objective for each application.

Further Reading

About the author: This article is written by a senior fire and loss prevention professional with over 25 years of industry experience, from Trainee Fire Officer to Administrative Head of Fire & Safety at a major Indian chemical company. The author prefers to remain anonymous so the content stays focused on engineering, not personality. firesafetywiki.com shares practical, field-tested fire safety knowledge for industrial and professional readers.

This article is general engineering information, not a design. Confirm requirements with the applicable standards and a qualified engineer.

3 thoughts on “MVWS vs HVWS: Medium and High Velocity Water Spray Systems”

  1. Pingback: Water Based Fire Protection Systems: MVWS, HVWS, Deluge

  2. Pingback: Sprinkler vs Deluge System: Differences and Uses

  3. Pingback: Water Curtain System and Drencher: Exposure Protection

Comments are closed.

Scroll to Top