Definition: The fire point of a liquid is the lowest temperature at which it produces enough vapour to keep burning for at least 5 seconds after an ignition source is applied and removed.
At the flash point, the vapour burns briefly and goes out. At the fire point, the liquid is evaporating fast enough to feed a continuous flame. It is usually determined with the open-cup method (e.g. Cleveland, ASTM D92) during the same test that finds the flash point.
Example: A lubricating oil may have a flash point of 220 °C and a fire point of about 250 °C. Between those temperatures, a flame produces only flashes. Above the fire point, the oil burns steadily.
Why it matters: Fire point is the more realistic threshold for a sustained pool fire. It is especially important for hydraulic fluids, lubricants, transformer oils and heat-transfer oils, where a leak onto a hot surface or near an ignition source can start a fire that keeps burning.
| Property | Fire point |
|---|---|
| Typical gap above flash point | Roughly 5–30 °C, depending on the liquid |
| Test method | Open cup (Cleveland), continued after the flash point is found |
| Ignition source needed | Yes |
| Reported on SDS | Not always; flash point is far more common |
FAQs
1. Is fire point always higher than flash point?
Yes. Sustained burning needs more vapour than a momentary flash does.
2. Why is fire point not on every SDS?
Regulations classify liquids by flash point, so fire point is mainly reported for oils and heavier products where it is relevant.
3. Does fire point mean the liquid ignites by itself?
No. It still needs an ignition source. Self-ignition is covered by auto-ignition temperature.
Related terms: Flash Point, Auto-Ignition Temperature, Flammable Liquid, Fire Triangle