History of Fireproofing: From the Great Fire of London to Modern Fire Testing

History of Fireproofing

The history of fireproofing stretches back more than 2,000 years, from alum painted on timber towers to the great city fires of Rome, London and Chicago and the standard fire tests we use today. Knowing this history explains why modern fire ratings and fireproofing materials work the way they do.

Key takeaways

  • Fireproofing grew out of city-scale disasters. Each great fire exposed a weakness in how buildings were made, and each answer (stone, terra cotta, standard tests, codes) built on the last.
  • “Fireproof” was once a marketing word. Cast iron and unprotected iron frames failed badly in Chicago (1871) and Boston (1872).
  • The 1904 Baltimore fire pushed the industry to a national, standardised fire test. The first ASTM standard with a standard time-temperature curve appeared in 1918, and that curve is still the backbone of fire-resistance ratings today.
  • The history explains why we separate fireproofing (a method) from fire rating (a tested result).

Fireproofing is one part of passive fire protection, the built-in measures that contain fire and protect a structure without power or human action. This article traces how that idea developed.

Timeline showing key moments in history of fireproofing: alum on a timber tower at Piraeus (87–86 BC), the Great Fire of Rome (AD 64), the Great Fire of London and Rebuilding Act (1666–67), the Chicago fire (1871), the Home Insurance Building (1885), New York's 1899 fire test method, the Baltimore fire (1904), ASTM C19 (1918) and the first British Standard curve (1932)

1. Ancient Beginnings: Alum and Stone

Before looking at the history, it helps to know what the term means today: fireproofing is the application of insulating materials to structural members so they keep their strength for a defined time in a fire.

The idea of making combustible things resist fire is very old.

Alum on timber (about 87 to 86 BC). The Roman writer Aulus Gellius, citing the historian Quadrigarius, records that during Sulla’s siege of the Piraeus, Archelaus, commander for King Mithridates, smeared a wooden defence tower with alum. Sulla’s troops could not set it alight. This is one of the earliest recorded uses of a chemical fire retardant, and alum-type salts remain relatives of modern fire-retardant chemistry.

The Great Fire of Rome (July, AD 64). Fire swept through the densely packed, multi-storey timber-and-brick tenements near the Circus Maximus and burned for about six days, flaring up again for three more. In rebuilding, Nero’s regulations called for wider streets and for the lower parts of buildings to be built solidly, without timber beams, in stone from Gabii or Alba, which Tacitus describes as resistant to fire. It is an early example of the code logic we still use: separate the buildings, and make the structure itself incombustible.

2. The Great Fire of London (1666)

The fire began on 2 September 1666 in a bakery on Pudding Lane and destroyed a large part of the medieval city. In February 1667 Parliament passed the Rebuilding of London Act, which required new buildings to be of brick or stone, set rules on wall thickness, storeys and street widths, and banned timber overhangs.

Two accuracy points matter for a reference article:

  • The 1667 Act was not the first building regulation in England. London had already banned thatched roofs after a major fire in 1212, and earlier rules favoured brick and stone.
  • It is better described as the first large-scale adoption of regulated building work, which is why it is often called the origin of modern building regulations.

3. The Industrial Age: When “Fireproof” Was a Myth

Through the 19th century, builders turned to cast iron, wrought iron and later steel for factories, warehouses and tall buildings. Because metal does not burn, many assumed it was fireproof.

Chicago in 1871 and Boston in 1872 proved otherwise. Exposed cast-iron columns and storefronts melted, deformed or fractured, and some so-called “fireproof” buildings collapsed. A second Chicago fire in 1874 finally pushed the city to take protection seriously. In the same year, the architect Peter Wight tested a protected iron column in a terra cotta oven and the clay-based protection stayed cool. Terra cotta tile became the standard way to fireproof iron and steel for decades.

The lesson is the foundation of this entire subject: non-combustible is not the same as fire-resistant.

The Home Insurance Building in Chicago (1884 to 1885, designed by William Le Baron Jenney, ten storeys and about 138 ft) is widely regarded as the first skyscraper, and it paired its metal frame with masonry and terra cotta fire protection. The tall steel frame was only practical because the frame could be protected.

4. From Disaster to Standardised Testing

Once structures were being built from members that could fail under heat, one question became urgent: how do you measure protection?

YearMilestone
1899New York City becomes the first American city to introduce a standard fire test method, in its building code
1902 to 1912Fire tests on floors and columns at Columbia University, New York, led by Ira Woolson and colleagues
1903A standard test method is adopted by the International Fire Prevention Congress, under the British Fire Prevention Committee
1904The Great Baltimore Fire destroys more than 1,500 buildings and spurs a national effort through ASTM
1906ASTM proposes a tentative standard test
1918First edition of the ASTM standard (C19, later renumbered E119), with the standard time-temperature curve
1928Samuel Ingberg’s full-scale fire tests in Washington, D.C. help link fire load to expected severity
1932First British Standard describing a time-temperature curve

Baltimore is the pivot point. Buildings that had been called fireproof were burned out across the downtown, and the insurance industry, which had borne the losses, demanded better evidence.

5. How the Standard Fire Test Works

The test that grew out of this period is the ancestor of ASTM E119, UL 263, ISO 834 and, in India, IS 3809. A sample wall, floor, beam or column is exposed to a furnace that follows a fixed time-temperature curve. Under ASTM E119 the assembly is judged on whether it:

  1. Carries its load for the rated period (stability).
  2. Prevents the passage of flame and hot gases (integrity).
  3. Limits temperature rise on the unexposed side (insulation), including not igniting cotton waste placed there.
  4. For rated assemblies, survives a hose stream test after the fire exposure.

The result is expressed in hours, which is why we talk about 1-hour, 2-hour or 4-hour ratings. That is the origin of the difference between fireproofing (the material you apply) and fire rating (the result the test measures).

This is why a fire rating is a tested result, while fireproofing is the method used to achieve it. For a practical guide to ratings, materials and inspection, see fireproofing of industrial buildings.

6. Beyond the Standard Curve

Two developments shaped modern industrial practice.

Not every fire is a wood-and-paper fire. The standard curve was designed for ordinary combustibles. It has no growth or decay phase and bears little resemblance to a real compartment fire. Process plants face hydrocarbon pool fires and jet fires that heat steel far faster. This led to rapid-rise hydrocarbon test methods such as UL 1709 and jet-fire testing under ISO 22899-1, and to the plant-specific guidance in API 2218 and, in India, OISD-STD-164. See our article on fireproofing of industrial buildings for how these are applied.

From prescriptive to performance-based. Standard tests rate individual elements in isolation, and the engineering community has long recognised that real structures behave as systems. Structural fire engineering, using the fire parts of the Eurocodes (EN 1992-1-2, EN 1993-1-2), now lets engineers calculate how a whole structure responds to a fire instead of relying on a single furnace test.

7. What the History Teaches Us

  • Fire-resistance is performance, not material. Steel, iron and masonry all failed in 19th-century fires. What mattered was how heat reached the structure.
  • Standards follow disasters. The Baltimore fire created the national test; the plant fires of the petrochemical era created hydrocarbon criteria.
  • Tests are comparative. A 2-hour furnace rating is a benchmark, not a prediction of how long a building will last in a real fire.
  • Protection must stay intact. Terra cotta spalled and clamps corroded in older buildings. Today’s equivalent is corrosion under fireproofing and open penetrations.

Frequently Asked Questions

When did fireproofing begin? Recorded efforts go back more than 2,000 years, with alum applied to timber and fire-resistant stone mandated in Rome after AD 64. Fire-resistance testing of structures began in the late 1800s and early 1900s.

Did the Great Fire of London create fireproofing? It produced one of the first large-scale fire-driven building regulations, mainly requiring brick and stone, but it was not the first and did not involve modern fireproofing materials.

Who created the standard fire test? It developed over time, from New York’s 1899 code, to Columbia University tests led by Ira Woolson, to ASTM’s work after the 1904 Baltimore fire. The first ASTM standard with the standard curve was published in 1918.

Why is steel not automatically “fireproof”? Steel does not burn, but it loses strength as it heats. Early iron- and steel-framed buildings failed for this reason.

Today’s fireproofing sits alongside other passive fire protection measures, such as fire-rated walls, doors and firestopping, to form a complete layer of protection that works without power or human action.

Further Reading

Scroll to Top