• Definition: A fire pump performance test is a procedure carried out to evaluate the operational and hydraulic performance of a fire pump by measuring its flow rate, discharge pressure, suction pressure and operating speed under different operating conditions. The test helps determine whether the pump is capable of delivering the required water flow and pressure in accordance with its approved performance curve and applicable fire protection standards.
• Example: During an annual fire pump performance test at an industrial facility, the pump is operated at different flow conditions. For a constant-speed centrifugal fire pump, these typically include zero flow (churn), 100% of rated capacity and 150% of rated capacity, subject to applicable standard provisions and available water supply. Measurements of suction pressure, discharge pressure, flow rate and pump speed are recorded and compared with the original acceptance test results or manufacturer's certified performance curve. nfpa.org+1
• Why it matters: A fire pump may start and run normally but still fail to deliver the required firefighting water flow and pressure. Performance testing helps identify deterioration in pump performance, impeller wear, suction restrictions, water supply deficiencies, mechanical problems and other abnormalities. Regular testing provides confidence that the fire pump will perform effectively when required during an emergency.
• Related terms: Fire Pump, Main Fire Pump, Standby Fire Pump, Jockey Pump, Pump Churn Pressure, Rated Pump Capacity, Fire Pump Performance Curve, Fire Pump Acceptance Test.
• Further Reading:
- NFPA 25 – Standard for the Inspection, Testing and Maintenance of Water-Based Fire Protection Systems.
- NFPA 20 – Standard for the Installation of Stationary Pumps for Fire Protection.
- Weekly or Monthly No-Flow (Churn) Tests of Fire Pumps – NFPA.
- Fire Pump Testing – Technical Advisory Bulletin.
- Fire Pump Sizing: How to Calculate Power Requirements